Export skid packing box
The chassis with sliding wood structure, the side and end face are made of box plate and box stop, which is called sliding wood packing box. The sliding wood packing box is a medium-sized wooden packing box. The weight of its contents does not exceed 1500kg. The sum of the length, width and height of the outer dimension is limited to 7m in width and less than 1.5m in height. It is mainly suitable for the packaging and transportation of large machinery, electromechanical products, heavy equipment and production line. Sliding wood packing box is composed of chassis, two end faces, two sides and top cover.
The chassis adopts sliding wood structure, and the side and end face are made of box plate and box stop packing box be called Skid packing box 。 The sliding wood packing box is a medium-sized wooden packing box, the weight of its contents does not exceed 1500kg, the sum of the length, width and height of the outer dimension is limited to 7m, and the width and height are less than 1.5m. It is mainly suitable for the packaging and transportation of large machinery, electromechanical products, heavy equipment and production lines. Sliding wood packing box is composed of chassis, two end faces, two sides and top cover.
1. Chassis: the chassis of sliding wood packing box is composed of five parts: sliding wood, auxiliary sliding wood, end wood, sleeper and bottom plate. According to the weight, stressed parts and characteristics of the product and equipment to be packed, the material specifications required for load are met through reasonable structural design, and the special threaded nails or bolts are used for connection. The role of sliding wood is to jointly bear with the side when lifting Export skid packing box For the weight of the contents, the auxiliary sliding block is used to form a rope mouth and a fork hole. When nailed on the sliding block, the weight of the contents is shared with the side. The end wood is fixed on the sliding wood with nails or bolts. The end timber is used to install the end face and strengthen the lateral connection of the sliding wood. The sleeper is used to support and fix the products in the box. The bottom plate is the wood plate nailed on the sliding wood horizontally. Its function is to connect the sliding wood and form the whole chassis as a whole. During the lifting process, the base plate can be prevented from skew.
2. Top cover: the cover plate of sliding wood packing box is mainly beam and top plate. After the product is packed into the packing box, the top cover is connected with the side box plate first, and then the top plate is nailed on the cross beam and the cross rails at both ends with nails. The cover plate can close the box, and the most important thing is to bear the horizontal extrusion from the steel wire rope during lifting.
3. The structure of side and end face is the same as that of frame packing case, which can be referred to Outer structure non fumigation packing box Although the main load-carrying capacity of the skid packing box comes from the chassis, the stacking load is mainly borne by two sides. It should also be noted that we can not completely close the floor when laying the bottom plate, and there should be a small gap between the boards to solve the ventilation and drainage problems of the sliding wood packing box.