Design of automobile power amplifier panel packing box
Time: 15:17:00, August 13, 2020Author:Click:second
In any product to dopacking boxDesign, we all need to start from the perspective of customers, for the interests of customers, strive to achieve high-quality service, innovative design, the following design case is for the company for a car power amplifier panel production enterprise customer design of a box, is also fully listen to the customer's requirements for packaging, a customized packaging box.
The maximum size of the protruding part of the product is 217 mm x 143mm x 18mm. Customers have several requirements for packaging: 1. The product must be placed and taken out quickly; 2. The product surface is easy to generate static electricity, which will cause dust absorption, so it is necessary to ensure the product surface is clean; 3. Limited by the means of transportation, the size of the delivery pallet is set to be 1200mm x 1000mm,For customer requirements and product related information, we began toPacking box designFor the first point, it needs to be placed conveniently.First of all, the product should be placed vertically. Secondly, there should be a certain gap for manual removal.For the second point, it is easy to cause dust absorption on the surface of the panel due to static electricity;As the front of the power amplifier is covered with film, it means that the requirements for preventing scratches on the surface of the power amplifier are high. In addition, the protruding parts also need to be protected. The outer layer is packaged with bubble bag.Then there is the problem of reasonable matching between the size of the packing box and the pallet. Because of the requirement of the transport pallet size of 1200mm x 1000m, the outer size of the packing box must be 400mm * 500mm or 300mm * 500mm, so as to ensure the maximum loading rate of the pallet.The design department can get the most suitable size according to the product size.
For the end of the product analysis, now start to giveCorrugated boxThe product length is 217mm. If two pieces are placed side by side, the size needs to be at least 434mm. In addition to the size of the product packaged with bubble bag and the thickness of the grille, the length of the packing box is recommended to be 500mm. In this way, the size of the width direction is recommended to be 300 mm, 400 mm and 600 mm, and the thickness of the product is 18 mm,With the foam bag, the size is expected to be 25 mm.If 12 pieces are placed in a row, the width of the packing box is required to be greater than 300 mm (the thickness of the grid and the space size of the dam surface should also be considered). It is suggested that the width of the packing box should be 400mm, which is in line with the size requirements of the pallet.In this way, the outer dimension of the length and width of the packing case is initially defined as 500mm x 400mm;The height direction can be defined with the width of the power amplifier panel.